Rosco Silk 210

P.O.A

The Rosco Silk 210, bi-colour LED, gives a soft, diffused light. Highly colour accurate with a TLCI of 97-98

Description

Creating beautifully soft, diffused light that gently embraces its subjects – the Rosco Silk 210 is the perfect choice for the most discerning filmmakers. The Silk series LED lighting system has been specifically developed for film and broadcast applications that necessitate extremely accurate, high quality colour.

Utilising state-of-the-art, proprietary, tungsten and daylight balanced LEDs, Rosco Silk 210 LED fixtures create a broad-spectrum white light that meets the vigorous demands of lm and video shoots.

Silk 210 ships with a 100 – 240 AC power supply enabling worldwide use. Power options include; V-lock and Anton/Bauer battery plates and 4-Pin XLR input for us with battery bricks and belts.

Features

  • High-volume light output — 2400 lux @ 1m @ 5600K
  • Colour-correct, attractive and soft light
  • DMX and local control
  • Non-glare diffuser provides uniform, single source light
  • Power via: AC, Anton/Bauer, V-Mount, 4-Pin XLR
  • Accessories for beam shaping: egg crate louvers, barn doors and softbox

 

Rosco Silk 210 Running on DC Sources

  • Designed to run on any voltage between 12V – 36VDC. However it is most efficient running at 24V. Below 20V the fixture becomes steadily less efficient.
  • For optimal performance run Silk on an AC transformer.
  • A second option is to run it on 24 V DC source, either with a block battery or with the Silk Double V – lock adaptor, BB-VLO-2X.
  • The third option is to run on one 12V battery using the V-lock or Anton/Bauer adaptor plate, BB-SIL-VLOCP or BB-SIL-ABCP. In this situation it is advised to use the highest capacity battery available. High capacity and heavy duty V-locks and Anton/Bauer batteries are available and High Draw versions are available from some manufacturers such as Hawk-Woods.
  • Manufacturers now offer a range of batteries that are designed for high current draw, up to 15A, ideal for use with Silk lighting products. A battery used on Silk 210 must have a current rating of >10A to cope with current draw at lower voltages to ensure it doesn’t cut out early and reduce running time.
  • There are a range of variables that effect battery life such as capacity, age, number of duty cycles, quality, and ambient temperature.
  • Silk firmware has been designed to protect the driver electronics. The entire display will flash a warning at 13V alerting the user that there is limited remaining capacity. At 12.5V the lamp will switch off and display “Lo OFF”.  The time between the warning display and cut out will vary but a typical duration would be 4 – 6 minutes.
  • Additionally there are other steps you can take to prolong battery life on Silk if running time is the priority. Roll off the output to <90% and walk the lamp in slightly closer to the subject if possible. This can increase the running time by up to 75%. Adjusting colour temperature below 5300K if possible will also increase running time. 4300K, for instance, if appropriate to your situation will increase running time by as much as 25%.

Technical Specifications

Part Number

LH-SIL-210 Silk 210 LED Lighting Fixture

Input voltage

12-36 VDC

Power supply

Universal 100-240 VAC, 50/60 Hz

Power consumption

120 watts max (DC)

Colour temp. range2800k to 6500k
Data

DMX 512 via 5-pin XLR

Dimensions

21.5” x 12.6” x 3.6” (557 x 352 x 98mm)

Weight

12.8 lbs. (5.9 kg)

Photometrics

DistanceLux @5600k
1m2400
2m900
3m380

Colour Metrics

Parameter3200K5600K
TLCI9798
CRI Ra9894
R99494
CQS9691

Video