RatPac AKS DMX Wireless System
Call Us For Price : +44 (0) 20 8833 7600
With the AKS DMX Wireless System, you no longer have to rely on bulky DMX cables or dangling power supplies. Dim lights using an app on your smart phone or tablet.
AKS DMX Wireless System for light control
With the RatPac AKS DMX Wireless System, you no longer have to rely on bulky DMX cables or dangling power supplies. Wireless lighting control has never been so easy – no more hassle with hooking up a mass of cables with transmitters and routers and no need for a computer science degree to configure the set up, saving you time and money!
Professionals in the film and TV trade can control the lights on set by downloading RatPac’s industry tested software on smart phones or tablets, both Apple and Android, and linking to the Lumen Radio powered AKS. LumenRadio’s CRMX technology gives the AKS over 1,200 feet of range to the lights and uses 128 bit encryption and error correction to ensure a clear signal no matter what.
Long range WiFi allows your tablet or phone to control the AKS from up to 250 feet away and the Ethernet port interfaces with most modern consoles and PC based DMX software. The included L2-Net Ethernet cable allows IOS devises with Luminair 3 software to work with the AKS even if the WiFi environment is saturated.
Set up is simple; turn on the AKS go to your device’s WiFi settings and chose RatPac AKS as your wireless network, turn on your DMX app and you’re ready to go!
Rapid Charging and a 14 hour battery ensure that you’ll always be ready.
Check out the info video with a how to use feature.
| AKS | Basic Kit, Charging case, RX Kit |
|---|
More info
- USB charging
- Luminar ready
- Art Net compatible
- One button connect
- Lumen radio transmitter
- 1/4 mile CRMX range
- DMX error correction
- Compatible with WDMX anad CRMX receivers
- Battery powered
- Self contained
- Belt-clip portable
- 128 bit encryption
- Intelligent frequency hopping
Set up Instructions
INSTRUCTIONS
Step 1:
Plug your Cintenna RX into a DMX-compatible fixture.
Step 2:
Power it up using the included AC adapter or an optional accessory cable.
Supply can be anywhere between 5-30 Volts DC.
Step 3:
Press the LINK button on your Cintenna TX or any LumenRadio CRMX transmitter. 2.4ghz WDMX G2, G3, and G4 Transmitters will also transmit to the Cintenna. The Cintenna RX is also RDM capable when linked to a LumenRadio Nova FX RDM.
That’s it!
The transmitter will relay all DMX commands to the receivers.
You can even daisy chain additional fixtures!
When you’re done:
Turn the Cintenna off by holding the Power button for 3 seconds. The
receiver will retain its link indefinitely until you unlink it, even if powered off!
To unlink just one Cintenna RX, hold down its Link button. To unlink
everything, hold down the transmitter’s button.
Charging:
The 14 hour battery can be charged with the supplied USB adapter.
Charge light goes off when the battery is full.
The Cintenna can charge and operate simultaneously.
Related products
English 
French